Connect the ECOVACS DEEBOT OZMO 950 to the Ecovacs Home app to manage supported cleaning controls from a smartphone or tablet. Pairing places the robot in setup mode, connects the phone to the robot temporarily, and then completes configuration in the app.
[reference] Title: Mobile Controls Text: After pairing, the app can provide access to supported cleaning controls, schedules, preferences, status information, progress, and device or maintenance information. Title: Setup Mode Text: The Reset Key is used during initial connection. A confirmation sound or voice prompt and a flashing indicator show that the robot is ready for the next setup step. Title: Temporary Connection Text: During pairing, the phone may need to connect temporarily to a Wi-Fi network whose name begins with Ecovacs before returning to the app. [/reference]Before Pairing
[checklist] * DEEBOT OZMO 950 is powered on * Battery level is sufficient to complete setup without interruption * Reset Key is located and accessible * Ecovacs Home app is available on the mobile device * Ecovacs account is ready, or an account can be created during setup [/checklist]Power On and Locate the Reset Key
Make sure the DEEBOT OZMO 950 is switched on and ready to respond. If the battery is very low, charge the robot before starting so the connection process is not interrupted.
Locate the Reset Key before continuing.
Enter Setup Mode
With the robot powered on, press the Reset Key to start the connection setup. Listen for a beep or a voice prompt indicating that the DEEBOT is entering setup mode.
If you do not hear a confirmation, wait briefly and check that the Reset Key was pressed correctly before continuing.
Check the Setup Indicator
The indicator should begin flashing after the DEEBOT enters setup mode. This shows that the robot is waiting for the temporary connection used during app setup.
If the indicator is not flashing, repeat the setup-mode step before moving on.
Complete Pairing in Ecovacs Home
[step] 1. Open the Ecovacs Home app on the smartphone or tablet. 2. Sign in to an Ecovacs account, or create one if needed. 3. Select Add a Robot to begin the guided connection process. 4. Follow the app instructions until you are asked to open the mobile device's Wi-Fi settings. 5. In the available Wi-Fi networks, select the temporary network whose name begins with Ecovacs. 6. After the mobile device connects to that network, return to the Ecovacs Home app. 7. Continue through the app prompts. The remaining screens may include confirming the robot, selecting the home network, or approving the connection. 8. Finish adding the DEEBOT OZMO 950 to the account and wait until it appears in the app. [/step] [tip] Keep the DEEBOT powered on and stay on the temporary Ecovacs network until the app instructs you to continue or the connection step is complete. [/tip]After Connection
Once pairing is complete, the DEEBOT OZMO 950 should appear in the Ecovacs Home app and be associated with the signed-in account. You can then use the available mobile controls instead of relying only on the robot's physical controls.
- Start or stop supported cleaning sessions remotely.
- Set automatic cleaning schedules when available.
- Select available cleaning preferences.
- Monitor cleaning progress and robot status.
- View available maintenance or device information.
- Manage regular cleaning more conveniently from a smartphone or tablet.
App access can also make daily or weekly cleaning routines easier to manage because common controls are available from one place on the mobile device.