Replace the dust-bin filter periodically as part of routine maintenance. Keeping the filter area clean and reinstalling only dry components helps maintain normal airflow through the vacuum.
[reference] Title: Filter Location Text: The filter is accessed through the removable dust bin and its filter chamber. Title: Filter Release Text: Open the filter chamber using the two marked release points, then use the filter strap to remove the filter. Title: Replacement Text: Replace the filter regularly rather than continuing to use a heavily worn or dirty filter. [/reference]Remove the Dust Bin
Pull the dust bin collector handle and lift the dust bin out of the Ecovacs Deebot Ozmo 950.
Open the Filter Chamber
Press the two marked release points to open the filter chamber and access the filter.
Remove the Old Filter
Use the filter strap to lift and remove the old filter from the chamber. Keep the surrounding dust-bin area clear so the replacement filter can sit properly when installed.
Clean the Dust Bin
Empty the dust bin, then rinse it under fresh running water as part of the filter-change routine.
[warning] Do not reinstall the dust bin while it is still wet. Allow it to dry completely before fitting the replacement filter and returning the dust bin to the robot. [/warning]Install the New Filter
Once the dust bin is completely dry, place the new filter into the filter chamber. Make sure it is seated in the filter area before closing the chamber.
[checklist] * Old filter has been removed * Dust bin has been emptied and rinsed * Dust bin is completely dry * New filter is installed in the filter chamber * Filter chamber is closed * Dust bin is returned to the robot [/checklist] [tip] Regular filter replacement and dust-bin cleaning help keep the vacuum's filtration and airflow working effectively. [/tip]