If parts of the map appear to overlap after a cleaning run, first consider whether the Ecovacs Deebot Ozmo 950 was moved or dragged while it was cleaning. Manual movement can affect its position on the saved map and make the cleaning path appear partially overlapped.
[reference] Title: Map Position Text: The robot relies on its current position relative to the map while it moves through the cleaning area. Title: Manual Movement Text: Dragging or repositioning DEEBOT during cleaning can shift its mapped position and disturb the displayed cleaning path. Title: Charging Dock Text: Returning DEEBOT to the charging dock is the basic action to use when the map becomes partially overlapped. [/reference]What Can Cause Overlapping
During cleaning, DEEBOT tracks where it is on the map while following its cleaning path. Moving the robot manually during this process can interfere with that position information.
- The robot may appear in an incorrect position on the map.
- The displayed cleaning path may no longer line up correctly.
- Parts of the map or cleaning path may appear partially overlapped.
Check the Map
If you notice overlapping areas, think about what happened during the current or recent cleaning run.
[checklist] * Check whether DEEBOT was dragged or manually repositioned during cleaning * Check whether the displayed robot position no longer matches its expected place on the map * Check whether the cleaning path appears shifted or partially overlapped [/checklist]Restore the Map Position
When map overlapping occurs, return the Ecovacs Deebot Ozmo 950 to its charging dock. This gives the robot a known location from which it can restore its map position.
[step] 1. Stop manually moving or dragging DEEBOT 2. Carry DEEBOT back to the charging dock 3. Place DEEBOT on the charging dock 4. Check the map again after DEEBOT restores its position [/step]For Future Cleaning Runs
[dosdonts] Do: Let DEEBOT navigate the cleaning area without unnecessary manual movement Do: Return DEEBOT to the charging dock if the map becomes partially overlapped Dont: Drag DEEBOT across the floor while it is cleaning Dont: Manually reposition DEEBOT during cleaning unless necessary [/dosdonts]Manual movement during cleaning can affect DEEBOT's position on the map, so avoiding unnecessary repositioning is the main preventive check for overlapping map paths.